Catch Daily Deals!
Go to Daily Deals Section-
-
Tapping Center
PT 400S
- Korea’s first 24,000RPM Spindle.
- The realization of the highest speed acceleration in the same class Z axis acceleration 2.0G.
- Equipped with high precise and high speed spindle.
- Applied with the self-developed high performance ATC.
- The ultra-high speed servo response (60m/min)
SKU: PT 400S -
Dust collector
CX SERIES
USE
- Foundation work.
- Mixed work.
- Stone carving work.
- The substrate processing operations.
- Casting cutting operations.
- Grinding operations.
- Drilling.
- Metalworking operations.
- Artillery operations.
- Inlet air transport and crushing operations.
- Mixer operation.
- Cutting process (flame occurs operations).
- The powder injectij.
- Grinding operations.
- Wood processing.
SKU: n/a -
-
Fiber
FS3015 Fiber
- Optimized strategic model with cost-effectiveness/functionality/practicality
- Ultralight and high-stiff cutting bridge
- Dynamic motion control
- Space-saving by mounting e-box & resonator onto main frame
- 21.5″ Wide touch screen
- No need separate room for resonator, temperature/humidity control for resonator
- High-precision & high-quality cutting capability
- Available on High-reflection/high-tech material
- No Alignment / No Service / No Overhaul / No Mirror
SKU: n/a
-
DUCT, DUCT
DUCT
USE
- Metal: Aluminum can, aluminum scrap, aluminum scrap, iron scrap, copper scrap, copper wire, silicon steel piece, cast iron powder, copper scrap
- Plastic: polystyrene bit, polystyrene bit, polystyrene scrap, polypropylene scrap, VPC scrap, plastic scrap , vertical board scrap
- Paper: scraps of paper, paper scraps, impregnated cutting wire
- Fiber: scraps of glass fiber cut wires, artificial turf fiber, asbestos
- Wood: wood planer rice
- Others: scraps of foam rubber, scraps of synthetic leather, scraps of cotton, Nylon fiber scraps, fabric scrap, tobacco, glass, granulated cork, sand, salt, fish meal, raw chicken weighing 1.8 kg, and Jet Fan are air material transport devices, and the use of this system is diverse. It has a new structure that is completely different from the conventional transport device, and the ejector of the jet fan increases the possibility of using a blower. The biggest feature of the Jet Fan is that the Jet Fan Ejector and the materials of its components easily solve the restrictions such as corrosion and abrasion due to temperature that can occur when the transporter passes through the rear end. According to this design, the need for maintenance, maintenance, inspection, maintenance and replacement is reduced, so the effect of actual cost reduction is doubled.
SKU: n/a - Metal: Aluminum can, aluminum scrap, aluminum scrap, iron scrap, copper scrap, copper wire, silicon steel piece, cast iron powder, copper scrap
-
Special clamping machine
BF SERIES Filter Dust Collector
USE
- Mineral factory
- Wood Factory
- Cement Factory
- Chemical plant
- Pharmaceutical Factory
- Pharmaceutical Factory
- Dye work
- Paint work
- Plastics industry
- Food industry
- Feed factory
- Grain factory
- Dust generating workshop
- Flour Mill
- Fertilizer Factory
- Businesses that emit other particulate matter
SKU: n/a -
Special clamping machine
HC SERIES Adsorption Tower Dust Collector
USE
- Chemical plant (paint manufacturing plant, etc.)
- Feed manufacturing plant
- Odor generating workplaces (excreta treatment plant, wastewater treatment plant, etc.)
- VOCs generating workplaces (organic solvents, etc.)
- Food manufacturing plant
SKU: n/a -
Special clamping machine
SB SERIES Scrubber Dust Collector
USE
- Plants that generate harmful gases, such as chemical plants
- Fume generating plants such as plating plants
- Workplaces that emit fine particulate matter
- VOCs generating business
- Wastewater treatment plant, excreta treatment plant odor generating plant
- Removal of fine particulate suspended matter, etc.
SKU: n/a
-
Fiber
FL3015 Fiber
- Minimize vibration through high rigidity main frame
- Equipped with ultra-light and high-rigidity cutting bridge
- · Dynamic motion control
- · Pipe processing possible (optional)
- Realization of optimal heavy plate processing through Smart-Cut
- Reduce piercing time and improve quality through quick piercing
- No need for a separate oscillator room (with oscillator constant temperature and humidity function)
- High-precision, high-quality processing of ultra-thin (0.1mm~0.5mm) materials
- Cutting high-reflection and high-level processing materials
- · No Alignment / No Service / No Overhaul / No Mirror
SKU: n/a -
-
-
Tapping Center
PT 400S
- Korea’s first 24,000RPM Spindle.
- The realization of the highest speed acceleration in the same class Z axis acceleration 2.0G.
- Equipped with high precise and high speed spindle.
- Applied with the self-developed high performance ATC.
- The ultra-high speed servo response (60m/min)
SKU: PT 400S -
Machine toole
XD42
Best model of high cost-effectiveness with strong machining performance & high-productivity for large bore of material.
- Adopt profitable structure for Stable chucking of large bore material
- Best productivity with great performance & reasonable price
- Optimized structure for stable machining of die casting, forging materials
SKU: n/a
-
-
Tapping Center
PT 400S
- Korea’s first 24,000RPM Spindle.
- The realization of the highest speed acceleration in the same class Z axis acceleration 2.0G.
- Equipped with high precise and high speed spindle.
- Applied with the self-developed high performance ATC.
- The ultra-high speed servo response (60m/min)
SKU: PT 400S -
Dust collector
CX SERIES
USE
- Foundation work.
- Mixed work.
- Stone carving work.
- The substrate processing operations.
- Casting cutting operations.
- Grinding operations.
- Drilling.
- Metalworking operations.
- Artillery operations.
- Inlet air transport and crushing operations.
- Mixer operation.
- Cutting process (flame occurs operations).
- The powder injectij.
- Grinding operations.
- Wood processing.
SKU: n/a -
-
Fiber
FS3015 Fiber
- Optimized strategic model with cost-effectiveness/functionality/practicality
- Ultralight and high-stiff cutting bridge
- Dynamic motion control
- Space-saving by mounting e-box & resonator onto main frame
- 21.5″ Wide touch screen
- No need separate room for resonator, temperature/humidity control for resonator
- High-precision & high-quality cutting capability
- Available on High-reflection/high-tech material
- No Alignment / No Service / No Overhaul / No Mirror
SKU: n/a
Trending products
See All Trending productsTapping Center
PT 400S
Korea’s first 24,000RPM Spindle.
The realization of the highest speed acceleration in the same class Z axis acceleration 2.0G.
Equipped with high precise and high speed spindle.
Applied with the self-developed high performance ATC.
The ultra-high speed servo response (60m/min)
SKU: PT 400S
Dust collector
CX SERIES
USE
Foundation work.
Mixed work.
Stone carving work.
The substrate processing operations.
Casting cutting operations.
Grinding operations.
Drilling.
Metalworking operations.
Artillery operations.
Inlet air transport and crushing operations.
Mixer operation.
Cutting process (flame occurs operations).
The powder injectij.
Grinding operations.
Wood processing.
SKU: n/a
Fiber
FS3015 Fiber
Optimized strategic model with cost-effectiveness/functionality/practicality
Ultralight and high-stiff cutting bridge
Dynamic motion control
Space-saving by mounting e-box & resonator onto main frame
21.5″ Wide touch screen
No need separate room for resonator, temperature/humidity control for resonator
High-precision & high-quality cutting capability
Available on High-reflection/high-tech material
No Alignment / No Service / No Overhaul / No Mirror
SKU: n/a
Laptops & Computers
Tapping Center
PT 400S
Korea’s first 24,000RPM Spindle.
The realization of the highest speed acceleration in the same class Z axis acceleration 2.0G.
Equipped with high precise and high speed spindle.
Applied with the self-developed high performance ATC.
The ultra-high speed servo response (60m/min)
SKU: PT 400S
Dust collector
CX SERIES
USE
Foundation work.
Mixed work.
Stone carving work.
The substrate processing operations.
Casting cutting operations.
Grinding operations.
Drilling.
Metalworking operations.
Artillery operations.
Inlet air transport and crushing operations.
Mixer operation.
Cutting process (flame occurs operations).
The powder injectij.
Grinding operations.
Wood processing.
SKU: n/a
Fiber
FS3015 Fiber
Optimized strategic model with cost-effectiveness/functionality/practicality
Ultralight and high-stiff cutting bridge
Dynamic motion control
Space-saving by mounting e-box & resonator onto main frame
21.5″ Wide touch screen
No need separate room for resonator, temperature/humidity control for resonator
High-precision & high-quality cutting capability
Available on High-reflection/high-tech material
No Alignment / No Service / No Overhaul / No Mirror
SKU: n/a
Smartphones & Tablets
Tapping Center
PT 400S
Korea’s first 24,000RPM Spindle.
The realization of the highest speed acceleration in the same class Z axis acceleration 2.0G.
Equipped with high precise and high speed spindle.
Applied with the self-developed high performance ATC.
The ultra-high speed servo response (60m/min)
SKU: PT 400S
Dust collector
CX SERIES
USE
Foundation work.
Mixed work.
Stone carving work.
The substrate processing operations.
Casting cutting operations.
Grinding operations.
Drilling.
Metalworking operations.
Artillery operations.
Inlet air transport and crushing operations.
Mixer operation.
Cutting process (flame occurs operations).
The powder injectij.
Grinding operations.
Wood processing.
SKU: n/a
Fiber
FS3015 Fiber
Optimized strategic model with cost-effectiveness/functionality/practicality
Ultralight and high-stiff cutting bridge
Dynamic motion control
Space-saving by mounting e-box & resonator onto main frame
21.5″ Wide touch screen
No need separate room for resonator, temperature/humidity control for resonator
High-precision & high-quality cutting capability
Available on High-reflection/high-tech material
No Alignment / No Service / No Overhaul / No Mirror
SKU: n/a