-
Tapping Center
PT 400S
- Korea’s first 24,000RPM Spindle.
- The realization of the highest speed acceleration in the same class Z axis acceleration 2.0G.
- Equipped with high precise and high speed spindle.
- Applied with the self-developed high performance ATC.
- The ultra-high speed servo response (60m/min)
SKU: PT 400S
-
-
Machine toole
XD42
Best model of high cost-effectiveness with strong machining performance & high-productivity for large bore of material.
- Adopt profitable structure for Stable chucking of large bore material
- Best productivity with great performance & reasonable price
- Optimized structure for stable machining of die casting, forging materials
SKU: n/a -
-
Machine toole
XD16III
Optimized for high precision machining and high productivity.
- Optimized machining with stable structure and high-speed for short cycle
- High efficiency of performance with wide space and various options
- Optimal mold casting and rib structure through finite element analysis
SKU: n/a
-
-
Machine toole
XD42
Best model of high cost-effectiveness with strong machining performance & high-productivity for large bore of material.
- Adopt profitable structure for Stable chucking of large bore material
- Best productivity with great performance & reasonable price
- Optimized structure for stable machining of die casting, forging materials
SKU: n/a -
-
Machine toole
XD16III
Optimized for high precision machining and high productivity.
- Optimized machining with stable structure and high-speed for short cycle
- High efficiency of performance with wide space and various options
- Optimal mold casting and rib structure through finite element analysis
SKU: n/a
-
Special purpose aircraft
Hybird
POSCO and HK joint development project- In the same system, laser cutting and oxygen cutting are possible according to the user’s choice.
- High reflective, highly difficult, and processed materials can be cut. The maximum cutting range is 5,000mm x 34,000mm
- High economical efficiency at a minimum cost. Innovative operating cost reduction
- Laser cutting 20mm or more. Gas cutting
SKU: n/a -
Bending machin
Electric bending machine
Electric type bending machine
- The electric system effectively reduces the conversion (Cicle Time) time compared to the hydraulic system.
- Low-cost/high-efficiency equipment that does not require regular maintenance used in hydraulic models.
- Beam synchronization by controlling two independent servo motor shafts.
SKU: n/a -
Co2
PS Series CO2
- Can work up to 8m x 2.5m
- Improved productivity and quality by working without moving the table by using the Full Pallet Change method
- Optimal cutting quality by applying beam size control function (Beam Radius Control)
- Implementation of the same quality across all sections by applying the Constant Beam Delivery System
- Equipped with automatic focus control device
- Lens cartridge replacement method
- Reduce piercing time and prevent cutting defects through plasma monitoring system
- 15 inch wide touch screen
SKU: n/a
-
Fibel
PS Series Fiber
- Minimize vibration through high rigidity main frame
- Equipped with ultra-light and high-rigidity cutting bridge
- Dynamic motion control
- Realization of optimal heavy plate processing through Smart-Cut
- Reduce piercing time and improve quality through quick piercing
- No need for a separate oscillator room (with oscillator constant temperature and humidity function)
- High-precision, high-quality processing of ultra-thin (0.1mm~0.5mm) materials
- Cutting high-reflection and high-level processing materials
- No Alignment / No Service / No Overhaul / No Mirror
- Secure working range up to 8m X 2.5m
SKU: n/a -
Fibel
FL3015 Fiber
- Minimize vibration through high rigidity main frame
- Equipped with ultra-light and high-rigidity cutting bridge
- · Dynamic motion control
- · Pipe processing possible (optional)
- Realization of optimal heavy plate processing through Smart-Cut
- Reduce piercing time and improve quality through quick piercing
- No need for a separate oscillator room (with oscillator constant temperature and humidity function)
- High-precision, high-quality processing of ultra-thin (0.1mm~0.5mm) materials
- Cutting high-reflection and high-level processing materials
- · No Alignment / No Service / No Overhaul / No Mirror
SKU: n/a -
Fibel
FS3015 Fiber
- Optimized strategic model with cost-effectiveness/functionality/practicality
- Ultralight and high-stiff cutting bridge
- Dynamic motion control
- Space-saving by mounting e-box & resonator onto main frame
- 21.5″ Wide touch screen
- No need separate room for resonator, temperature/humidity control for resonator
- High-precision & high-quality cutting capability
- Available on High-reflection/high-tech material
- No Alignment / No Service / No Overhaul / No Mirror
SKU: n/a
-
Co2
PS Series CO2
- Can work up to 8m x 2.5m
- Improved productivity and quality by working without moving the table by using the Full Pallet Change method
- Optimal cutting quality by applying beam size control function (Beam Radius Control)
- Implementation of the same quality across all sections by applying the Constant Beam Delivery System
- Equipped with automatic focus control device
- Lens cartridge replacement method
- Reduce piercing time and prevent cutting defects through plasma monitoring system
- 15 inch wide touch screen
SKU: n/a -
Co2
FL3015 CO2
- Can work up to 8m x 2.5m
- Improved productivity and quality by working without moving the table by using the Full Pallet Change method
- Optimal cutting quality by applying beam size control function (Beam Radius Control)
- Implementation of the same quality across all sections by applying the Constant Beam Delivery System
- Equipped with automatic focus control device
- Lens cartridge replacement method
- Reduce piercing time and prevent cutting defects through plasma monitoring system
- 15 inch wide touch screen
SKU: n/a
-
Bending machin
Electric bending machine
Electric type bending machine
- The electric system effectively reduces the conversion (Cicle Time) time compared to the hydraulic system.
- Low-cost/high-efficiency equipment that does not require regular maintenance used in hydraulic models.
- Beam synchronization by controlling two independent servo motor shafts.
SKU: n/a
-
Special purpose aircraft
Hybird
POSCO and HK joint development project- In the same system, laser cutting and oxygen cutting are possible according to the user’s choice.
- High reflective, highly difficult, and processed materials can be cut. The maximum cutting range is 5,000mm x 34,000mm
- High economical efficiency at a minimum cost. Innovative operating cost reduction
- Laser cutting 20mm or more. Gas cutting
SKU: n/a
-
Special chucks
IDS
Self centering 2+2+2 Jaw Power Chuck
Application / Customer’s Benefit
High accuracy Self centering 2+2+2 jaw power chuckTechnical features
Ideal for thin workpiece (Easily deformable workpiece)
Compensating deviation of workpieces by 2+2+2 jaw (clamping 6 point at once)
100% compatibility with existing cylinderSKU: n/a -
Special chucks
IDF
Self centering 2+2 Jaw Power Chuck
Application / Customer’s Benefit
High precision self-centering 4-Jaw power chuck(2+2 Jaw)Technical features
Ideal for rectangular and square work pieces ; self-centering in two axles
Single wedge actuation does not require dual-piston cylinder
2+2 Jaw chuck with 2 independent self-centering jawsSKU: n/a -
Special chucks
EGL
Centering Ball Lock Chuck
Application / Customer’s Benefit
I.D & O.D Clamping for rough castings or forgingsTechnical features
Grips on taper upto 10º
Compensating centrifugal force provides faster rotating RPM than PBL chuck’s full sealed to prevent chips from entering the chuck body
Pull down function (1mm)SKU: n/a -
Special chucks
CORH
Module change type Collet Chuck
Application / Customer’s Benefit
The COR chuck is I.D clamping chuck which has high surface, also it has strongclamping force during high r.p.m. precision.Technical features
Quick change rubber -steel segment collet
Round, square and hexagonal collets availableSKU: n/a -
Special chucks
FWC
Aluminum Wheel Chuck
Application / Customer’s Benefit
Ideal for machining the aluminum wheels used on cars and motorcycles
Improving the produtivity with lower weigt and GD2 .Technical features
Finger clamping type of cam arm structure has strong clamping force.
Lower weight increases efficiency and reduces down time.SKU: n/a -
Special chucks
CSF
Compensating Chuck
Application / Customer’s Benefit
A spherical bearing enables the jaws to compensate for high-precision work on rounded surfacesTechnical features
Jaws float on spherical bearing to determined clamping points
Spring or fixed center available, All three jaws apply constant gripping forceSKU: n/a
-
Power chucks
HC(groove type)
3-Jaw Hydraulic / 4-Jaw Independent Chuck (800mm -1600mm)
Application / Customer’s Benefit
3-Jaw Power Chuck (HC-32G,HC-40G)
4-Jaw independent closed-center power chuck (HC-50G,HC-55G,HC-63G)Technical features
Gripping force transmisstion by wedge structure
Hardening treatment to assure greatest precision and longer chuck lifeSKU: n/a -
Power chucks
HCWF
4-Jaw Double Wedge Hydraulic Chuck
Application / Customer’s Benefit
For clamping round, cubic, pipe and geometrically irregular workpieces
Available with manual jawsTechnical features
Concentric and compensating clamping by double wedge
Hardening treatment to assure greatest precision and longer chuck lifeSKU: n/a -
-
Rotating cylinders
YS-RC
Ultra-compact closed-center hydraulic cylinder with proximity bracket and built-in rotary joint
Application / Customer’s Benefit
Ultra-compact closed-center hydraulic cylinderTechnical features
Built-in lock and relief valves prevent damage caused by excessive pressure
Ensures saftey during blackouts or loss of power by maintaining pull force
Built-in Rotary jointSKU: n/a -
Rotating cylinders
SD-S
Mega-Bore Short Body Open-Center Hydraulic Cylinder(Seal Type)
Application / Customer’s Benefit
Low drain, Ultra slim open-center cylinderTechnical features
Low drain minimizeds heat
Prohibit leakage of cylinder by sealed function
Ideal for small space of machine and installation into sub spindle.SKU: n/a -
Rotating cylinders
DYV
Double-Piston Hydraulic Cylinder with Lock Valve
Application / Customer’s Benefit
Dual pistons actuate independently. May use with HCWF in dual or interlinked configurations. Suitable for VTLs and horizontal lathesTechnical features
Built-in ports for air sensing and coolant-thru (rotary union required)SKU: n/a -
Rotating cylinders
YS-RA
Ultra-Compact Closed-Center Hydraulic Cylinder with Proximity Bracket and Built-in Rotary Union
Application / Customer’s Benefit
Ultra-Compact Closed-Center Hydraulic Cylinder with Proximity BracketTechnical features
Built-in lock and relief valves prevent damage caused by excessive pressure
Ensures saftey during blackouts or loss of power by maintaining pull force
Built-in Rotary jointSKU: n/a -
Rotating cylinders
YH-RE
Ultra-Compact Closed-Center Hydraulic Cylinder with Proximity Bracket
Application / Customer’s Benefit
Ultra-Compact Closed-Center Hydraulic Cylinder with Proximity BracketTechnical features
Built-in lock and relief valves prevent damage caused by excessive pressure, and ensures saftey during blackouts or loss of power by maintaining pull forceSKU: n/a -
Rotating cylinders
Y-RE
Standard Closed-Center Hydraulic Cylinder with Proximity Bracket
Application / Customer’s Benefit
Closed-Center Hydraulic Cylinder with Proximity BracketTechnical features
Built-in lock and relief valves prevent damage caused by excessive pressure, and ensures saftey during blackouts or loss of power by maintaining pull forceSKU: n/a
-
Steady Rest
STRA
Self-Centering Steady Rest (Wide)
Application / Customer’s Benefit
Enhances machining accuracy by avoiding problem with unstable, heavy or long work piecesTechnical features
The arms and center rollers are interconnected and designed to self-adjust to various size workpieces.
The mechanical design improves durability by eliminating the need for springs.SKU: n/a -
Steady Rest
STA
Self-Centering Steady Rest
Application / Customer’s Benefit
Enhances the accuracy when machining unstable, heavy or long work pieceTechnical features
The arms and center rollers are interconnected and designed to self-adjust to various size workpieces.
The mechanical design improves durability by eliminating the need for springs.SKU: n/a
-
Vises
MDV
Double Power Vise
Consists of Two movable Jaws and One fixed Center Jaw for Double claming
Equipped with step Jaw & Middle Jaw suitable for various workpieces
Seal structure makes preventing the inner body from inflowing dust
Realize High Clamping Force by Mechanical gravity DeviceSKU: n/a
-
DUCT, DUCT
DUCT
USE
- Metal: Aluminum can, aluminum scrap, aluminum scrap, iron scrap, copper scrap, copper wire, silicon steel piece, cast iron powder, copper scrap
- Plastic: polystyrene bit, polystyrene bit, polystyrene scrap, polypropylene scrap, VPC scrap, plastic scrap , vertical board scrap
- Paper: scraps of paper, paper scraps, impregnated cutting wire
- Fiber: scraps of glass fiber cut wires, artificial turf fiber, asbestos
- Wood: wood planer rice
- Others: scraps of foam rubber, scraps of synthetic leather, scraps of cotton, Nylon fiber scraps, fabric scrap, tobacco, glass, granulated cork, sand, salt, fish meal, raw chicken weighing 1.8 kg, and Jet Fan are air material transport devices, and the use of this system is diverse. It has a new structure that is completely different from the conventional transport device, and the ejector of the jet fan increases the possibility of using a blower. The biggest feature of the Jet Fan is that the Jet Fan Ejector and the materials of its components easily solve the restrictions such as corrosion and abrasion due to temperature that can occur when the transporter passes through the rear end. According to this design, the need for maintenance, maintenance, inspection, maintenance and replacement is reduced, so the effect of actual cost reduction is doubled.
SKU: n/a - Metal: Aluminum can, aluminum scrap, aluminum scrap, iron scrap, copper scrap, copper wire, silicon steel piece, cast iron powder, copper scrap
-
Dust collector
CXM SERIES Multi-Cyclone Integrated Dust Collector
USE
- Cutting work
- Mixing work
- Stone carving work
- Substrate processing
- Casting cutting work
- Grinding work
- Drill work
- Metal processing work
- turret work
- Air transport inlet
- Shredding
- Mixer work
- Cutting operation (flame generation)
- Powder input operation
- Grind work
- Wood processing work
SKU: n/a -
-
-
Dust collector
CX SERIES
USE
- Foundation work.
- Mixed work.
- Stone carving work.
- The substrate processing operations.
- Casting cutting operations.
- Grinding operations.
- Drilling.
- Metalworking operations.
- Artillery operations.
- Inlet air transport and crushing operations.
- Mixer operation.
- Cutting process (flame occurs operations).
- The powder injectij.
- Grinding operations.
- Wood processing.
SKU: n/a
-
Special clamping machine
SB SERIES Scrubber Dust Collector
USE
- Plants that generate harmful gases, such as chemical plants
- Fume generating plants such as plating plants
- Workplaces that emit fine particulate matter
- VOCs generating business
- Wastewater treatment plant, excreta treatment plant odor generating plant
- Removal of fine particulate suspended matter, etc.
SKU: n/a -
Special clamping machine
HC SERIES Adsorption Tower Dust Collector
USE
- Chemical plant (paint manufacturing plant, etc.)
- Feed manufacturing plant
- Odor generating workplaces (excreta treatment plant, wastewater treatment plant, etc.)
- VOCs generating workplaces (organic solvents, etc.)
- Food manufacturing plant
SKU: n/a -
Special clamping machine
BF SERIES Filter Dust Collector
USE
- Mineral factory
- Wood Factory
- Cement Factory
- Chemical plant
- Pharmaceutical Factory
- Pharmaceutical Factory
- Dye work
- Paint work
- Plastics industry
- Food industry
- Feed factory
- Grain factory
- Dust generating workshop
- Flour Mill
- Fertilizer Factory
- Businesses that emit other particulate matter
SKU: n/a
-
DUCT, DUCT
DUCT
USE
- Metal: Aluminum can, aluminum scrap, aluminum scrap, iron scrap, copper scrap, copper wire, silicon steel piece, cast iron powder, copper scrap
- Plastic: polystyrene bit, polystyrene bit, polystyrene scrap, polypropylene scrap, VPC scrap, plastic scrap , vertical board scrap
- Paper: scraps of paper, paper scraps, impregnated cutting wire
- Fiber: scraps of glass fiber cut wires, artificial turf fiber, asbestos
- Wood: wood planer rice
- Others: scraps of foam rubber, scraps of synthetic leather, scraps of cotton, Nylon fiber scraps, fabric scrap, tobacco, glass, granulated cork, sand, salt, fish meal, raw chicken weighing 1.8 kg, and Jet Fan are air material transport devices, and the use of this system is diverse. It has a new structure that is completely different from the conventional transport device, and the ejector of the jet fan increases the possibility of using a blower. The biggest feature of the Jet Fan is that the Jet Fan Ejector and the materials of its components easily solve the restrictions such as corrosion and abrasion due to temperature that can occur when the transporter passes through the rear end. According to this design, the need for maintenance, maintenance, inspection, maintenance and replacement is reduced, so the effect of actual cost reduction is doubled.
SKU: n/a - Metal: Aluminum can, aluminum scrap, aluminum scrap, iron scrap, copper scrap, copper wire, silicon steel piece, cast iron powder, copper scrap